BERNINA accessories

Pintuck and decorative-stitch foot with clear sole #46C makes it a breeze to sew fetching pintucks and then embellish them evenly.

The clear sole provides a perfect view of the stitching area at all times. The pintucks are sewn first, with the finished pintucks lying in the grooves on the bottom of the foot. In a second step, the Pintuck and decorative-stitch foot with clear sole #46C is used to embellish the pintucks with precisely parallel lines of stitching – so there’s no need to trace the lines beforehand.

Buttonhole foot #3C is ideally suited to sewing buttonholes, as well as gathering with cord or elastic (smocking). Thanks to its practical grooves, Buttonhole foot #3C is able to glide smoothly over the thread beads of the buttonhole, enabling particularly easy and precise sewing.

The upper thread can be conveniently pulled to the back through the slot in Buttonhole foot #3C before you begin sewing. In this way, attractive buttonholes with and without cording can easily be sewn in the desired length.

Blindstitch foot #5 is the invisible-hemming expert. When you sew a blind-hem with this foot, the stitching can scarcely be seen from the front. With Blindstitch foot #5 the stitch is formed over a special blade that acts as a guide, creating a slightly loose stitch so that the hem lies nice and flat.

When the fabric is pressed flat, the needle-penetration points on the front of the fabric “close up”, making the seam virtually invisible. What’s more, the guide blade ensures an even distance to the folded edge, allowing the hem to be sewn neatly and consistently.

Embroidery foot #6 is ideal for satin stitching and other dense stitch patterns. The wide channel under the sole allows it to glide effortlessly over thicker and wider stitch formations without fabric feed being affected.

The result is a neat and consistent stitch pattern. Embroidery foot #6 also features a small hole in the center of the foot for couching a narrow cord or elastic.

This makes it a cinch to sew attractive edge finishes and gorgeous embellishments with this presser foot.

Lap-seam foot #70 enables you to sew precise lapped and flat-felled seams in light and medium weight fabrics.

The square toe on the right of the presser foot acts as a guide for turned-under fabric edges on sportswear, jeans, and men’s shirts.

The small channel on the left-hand side of Lap-seam foot #70’s presser foot tip holds the fabric edge in place for the second line of stitching. This versatile presser foot is also suitable for sewing reversible garments.

Short adapter shank #77 is the shortened version of Standard adapter shank #75. Serving as a connecting piece between needle bar and accessory, Short adapter shank #77 allows other manufacturers’ presser feet to be used on BERNINA machines.

If these feet are short-shanked, they won’t fit on the machine’s standard holder without an adapter. By contrast, Standard adapter shank #75 is used e.g. with BERNINA sewing accessories such as Simple binder #85 or Ruffler attachment #86. Please note that, unlike with the Simple binder, the special BERNINA Binder foot #95 is to be used for binder attachments for pre-folded (#87) and unfolded (#88) bias tape. This will ensure the optimal functioning of these presser feet.

Discover Short adapter shank #77 for the hassle-free attachment of short-shanked presser feet!

All that Glitters Sews!
Coated with 24K gold, the special edition Reverse Pattern Foot #1 is an optional accessory packaged in a beautiful commemorative tin complete with a golden spool of Mettler Thread.  Whether it be for collecting or sewing*, this foot leaves a brilliant impression.

Now is the time to take advantage of this golden opportunity because it doesn’t come around every year.  So hurry and get your foot while supplies last!

The Gold Standard
 

Gold-Plated Presser Foot #1: The Gold-Plated Presser Foot #1 is ideally suited to sewing forward and reverse-feed stitches with its cut-outs in front and back of the needle opening.*
Metallic Golden Mettler Thread: Add beautiful golden stitches to your favorite projects.
Commemorative Tin: Store your golden foot within the golden keepsake.
 
SHIP TO HOME, Use promo code: SHIP125GOLD

In celebration of our 125th Anniversary, have the 125th Anniversary Golden Foot #1 in Commemorative Tin mailed directly to your home by your selected store.
* This BERNINA presser foot is coated with 24-carat gold. Gold is a soft precious metal, and therefore signs of abrasion can and likely will occur in the ordinary use of this product. The functionality of this product will not be affected by these abrasions. BERNINA MAKES NO REPRESENTATIONS OR WARRANTIES WHATSOEVER WITH RESPECT TO THE OVERALL APPEARANCE OF THE PRESSER FOOT, AND DISCLAIMS ANY LIABILITY RELATED THERETO, INCLUDING WITHOUT LIMITATION FOR SIGNS OF ABRASIONS AND ORDINARY WEAR AND TEAR.

The Buttonhole cutter with wooden block is the ideal tool for opening finished buttonholes. The wooden block is placed under the buttonhole, while the chisel is pressed against the block from above. Only slight pressure is required to cut through the fabric.

The knife attached to the chisel is applied in the center between the beads of the buttonhole, and cuts through directly onto the wooden block below.

Thanks to its precise design, the blade slices through the buttonhole cleanly and accurately, without damaging the beads and bartacks. This helps prevent unsightly fraying of buttonholes on coats and other garments.

Discover the BERNINA Buttonhole cutter with wooden block now – the ideal partner for opening buttonholes.

The plexiglass extension table for quilting makes light work of large quilting projects such as throws, quilts and wall hangings, increasing your work surface and distributing the weight of the quilt evenly over the entire table. The Plexiglass extension table for quilting is very stable and fabric moves like a dream over its smooth surface. Used in conjunction with BERNINA Quilting foot #29 or Echo-quilting and CutWork foot #44C, it gives you neat, precise results even with challenging quilting projects.

The BERNINA L trolley is very sturdy and perfect for travel. The many internal and external compartments ensure that there is plenty of space for accessories. Thanks to the sturdy wheels and extendable telescopic handle, you can easily transport your sewing machine and the attached embroidery module. The side handles also make it easy to lift when loading and unloading. Three additional inserts with hook and loop fasteners ensure optimal support when transporting smaller BERNINA sewing machines.

For the perfect accompaniment to the L Trolley, BERNINA recommends the L Embroidery Module Bag for embroidery modules. It can be attached to the telescopic handle of the trolley or is easy to carry thanks to the adjustable shoulder strap.

For quick, efficient sewing: the Multiple-spool-holder extension is a help with beginners’ projects and challenging sewing endeavors alike. The BERNINA Multiple-spool holder has room for up to 15 different thread spools. This supplement allows you to accommodate additional thread colors and hold them at the ready. This is a great boon, especially with sewing and embroidery designs with multiple thread colors.

The Multiple-spool-holder extension attaches easily to the side of the spool holder itself, and is just as easy to remove when no longer needed. The Multiple-spool holder makes the thread path longer, allowing the threads to untangle before they reach the start of the sewing process.

Hooping any fabric with the BERNINA Midi embroidery hoop is so easy. Due to the reliable ergonomic twist-lock-mechanism, the hoop can be opened and closed with a touch of a finger. The BERNINA Midi embroidery hoop features the same comfort and precision as the Maxi and Jumbo Hoop, and suits perfectly for medium-sized embroidery motifs.

The BERNINA Midi Hoop is compatible with the models of the NEW BERNINA 5 Series as well as with the B 880 PLUS and B 790 PLUS. After installing the firmware update, the B 880, B 830, B 790, B 780, B 770 QE, B 750 QE, B 740, B 720 and B 700 are also compatible with the BERNINA Midi Hoop. Detailed information about the current firmware update can be found on the support tab of the respective machines.

Reverse-pattern foot with clear sole #34D affords a clear view of the needle and stitching area. The red markings on the top of the presser foot allow for especially precise and careful sewing.

A versatile, all purpose foot, Reverse-pattern foot with clear sole #34D is suitable for many forward and reverse-feed utility and decorative stitches, and is often used in general sewing projects, whether large or small.

The ruler kit is suitable for all BERNINA sewing machines and for the BERNINA Q 20 sit-down longarm machine. In combination with the adjustable ruler foot #72 or ruler foot #96, the ruler kit can be used to create decorative quilting patterns. The height of the rulers is desiged so that they are easy to guide and can be comfortably moved under the presser foot with the quilting project.

The kit contains five rulers:
Mini straight line tool 6-1/2”
Mini 4-in-1 4.1/4" x 6.1/4"
Squiggle 1.3/4" x 5/8" + 5"x 3/4"
Nested mini circles 1"- 4"
Nested mini ovals 1.1/2" x 1" – 4.1/2" x 2.1/2"